Turint
"Styrodur" (ekstrudinis putų polistirenas), darbas ženkliai palengvėja.
Remiuosi šiais šaltiniais:
1. http://www.aimi-doll.com/howto/index.html
With "Styrodur (extruded foam polystyrene), your work become much easier.
I refer to these sources:
1.http://www.aimi-doll.com/howto/index.html
2. http://morezmore.com/myblog/2010/01/02/bjd-1/
2. http://morezmore.com/myblog/2010/01/02/bjd-1/
3. http://morezmore.com/myblog/2010/10/29/morezmore-25-ball-jointed-doll-bjd-figuring-out-the-mechanics-part-4/
3. http://morezmore.com/myblog/2010/10/29/morezmore-25-ball-jointed-doll-bjd-figuring-out-the-mechanics-part-4/
Ant paprasto popieriaus, pagal turimą lėlės schemą, pasiruošiam šablonėlius šiek tiek mažesnius, nei pati lėlė. Tokiu būdu pasiliksime užleidimus modelinui. Šablonėlius dedam ant "Styrodur" ir pjauname reikalingas formas. Iš bėdos tiks ir paprastas putų polistirenas, bet jis labai "nesmagus" tokiam darbui.
On plain paper, according to the doll's scheme, prepare the samplers of all body parts slightly smallers than the doll itself. In this way, we will leave space for clay's overlap. Let place the samplers on the "Styrodur" and cut the necessary forms. Partially could fit simple Polystyrene foam but it is uncomfortable for such work.
1. http://www.aimi-doll.com/howto/index.html
With "Styrodur (extruded foam polystyrene), your work become much easier.
I refer to these sources:
1.http://www.aimi-doll.com/howto/index.html
2. http://morezmore.com/myblog/2010/01/02/bjd-1/
2. http://morezmore.com/myblog/2010/01/02/bjd-1/
3. http://morezmore.com/myblog/2010/10/29/morezmore-25-ball-jointed-doll-bjd-figuring-out-the-mechanics-part-4/
Ant paprasto popieriaus, pagal turimą lėlės schemą, pasiruošiam šablonėlius šiek tiek mažesnius, nei pati lėlė. Tokiu būdu pasiliksime užleidimus modelinui. Šablonėlius dedam ant "Styrodur" ir pjauname reikalingas formas. Iš bėdos tiks ir paprastas putų polistirenas, bet jis labai "nesmagus" tokiam darbui.
On plain paper, according to the doll's scheme, prepare the samplers of all body parts slightly smallers than the doll itself. In this way, we will leave space for clay's overlap. Let place the samplers on the "Styrodur" and cut the necessary forms. Partially could fit simple Polystyrene foam but it is uncomfortable for such work.
Taip paruošiam dalis visam kūnui.Tie, kas polistireno neturi, teks gaminti "mėsą" iš folijos. Nėra lengva išformuoti reikiamas formas. Papildomas dalis aprišau siūlu. Viduje įdėjau iš kokteilinių šiaudelių pagamintą karkasą.
We have to prapere the parts of all body. Those who do not have a polystyrene, will produce "meat" of the foil. It is not so easy to disband the necessary forms with it.Additional part of foil I bend with a thread. As a frame I used cocktail straws.
We have to prapere the parts of all body. Those who do not have a polystyrene, will produce "meat" of the foil. It is not so easy to disband the necessary forms with it.Additional part of foil I bend with a thread. As a frame I used cocktail straws.
Prieš lipdant, dalis galima apvynioti maistine plėvele, ypač darant iš putoplasto arba "Styrodur'o". Darant taip, kaip aš- iš folijos, dalis galite palikti ir neapvyniotas. Gali būti sunku formuoti modelino sluoksnį ant slidesnių paviršių, bet lėlės vidus bus idealiai lygus ;)
Before modeling, all your parts you can wrap with cateringfilm, especialy the parts made of Styrodur. In case, as mine, the parts of foil you may leave unwrapped. It may be difficult to form layers of clay on the slicker surface, but you'll reach the perfection- smooth surface inside;)
Before modeling, all your parts you can wrap with cateringfilm, especialy the parts made of Styrodur. In case, as mine, the parts of foil you may leave unwrapped. It may be difficult to form layers of clay on the slicker surface, but you'll reach the perfection- smooth surface inside;)
No comments:
Post a Comment